There is a lot about furniture refinishing Chicago citizens should know. This is a process that can save the house owner a lot of money that would have otherwise been used in acquiring other pieces. This is because the process enables an individual to make his pieces to appear as good as new. It is usually possible for one to alter the entire look of his room by simply refinishing his furniture to make them look more contemporary.
If the home owner has invested in quality furniture, he will discover that it is simple to renew the finish in order to create a different look. Some materials and tools will therefore be necessary to facilitate this process. Such can be found in the local DIY outlets or the specialist supplier at affordable rates.
During this process, the home owner needs to be much careful because he will be dealing with chemicals and materials that could be harmful when not properly handled. As a result, it will be essential to abide to all instruction given by the manufacturer of these products. In addition, the components should be put in places that are far from the reach of children and animals. There are also some guidelines provided to assist an individual through the entire process.
It will be wise to set aside some time for the project. The amount of time required for the task will greatly depend on the pieces being worked on. It will be a great idea if one tackled the project one piece at a time. This task can be somehow messy and therefore, it is good to do one piece before starting another. All steps must be followed carefully.
There are various websites available online which could equip an individual with the necessary skills and know-how to undertake the project. From the guidelines offered in these sites, the home owner will discover that the initial step toward timber refinishing is to strip. Furniture may be finished with different products such as the lacquer, vanish or the shellac. It is essential to make sure that the stripper used is specifically meant for the finish that was applied.
After removing the old finish, the next step would be to sand the pieces. In this case, it will be important to ensure that a good orbital sander is used. The process should be carried out evenly and care must be taken so as not to scratch the timber. The results of this process will be evident after one has applied the stain.
Once the piece has been stained, it will be important to seal and apply the finish on it. In this case, one also needs to follow the instructions provided for undertaking the task. It is important that the products used in this process are compatible with the wooden pieces. In addition to that, it will be wise to use products of same range so as to produce similar results for the work done.
The above are important guidelines for furniture refinishing Chicago household owners need to know. The tasks provided are pretty much straight forward and can easily be done by anyone. When the tips are properly followed, one will never go wrong.
If the home owner has invested in quality furniture, he will discover that it is simple to renew the finish in order to create a different look. Some materials and tools will therefore be necessary to facilitate this process. Such can be found in the local DIY outlets or the specialist supplier at affordable rates.
During this process, the home owner needs to be much careful because he will be dealing with chemicals and materials that could be harmful when not properly handled. As a result, it will be essential to abide to all instruction given by the manufacturer of these products. In addition, the components should be put in places that are far from the reach of children and animals. There are also some guidelines provided to assist an individual through the entire process.
It will be wise to set aside some time for the project. The amount of time required for the task will greatly depend on the pieces being worked on. It will be a great idea if one tackled the project one piece at a time. This task can be somehow messy and therefore, it is good to do one piece before starting another. All steps must be followed carefully.
There are various websites available online which could equip an individual with the necessary skills and know-how to undertake the project. From the guidelines offered in these sites, the home owner will discover that the initial step toward timber refinishing is to strip. Furniture may be finished with different products such as the lacquer, vanish or the shellac. It is essential to make sure that the stripper used is specifically meant for the finish that was applied.
After removing the old finish, the next step would be to sand the pieces. In this case, it will be important to ensure that a good orbital sander is used. The process should be carried out evenly and care must be taken so as not to scratch the timber. The results of this process will be evident after one has applied the stain.
Once the piece has been stained, it will be important to seal and apply the finish on it. In this case, one also needs to follow the instructions provided for undertaking the task. It is important that the products used in this process are compatible with the wooden pieces. In addition to that, it will be wise to use products of same range so as to produce similar results for the work done.
The above are important guidelines for furniture refinishing Chicago household owners need to know. The tasks provided are pretty much straight forward and can easily be done by anyone. When the tips are properly followed, one will never go wrong.
About the Author:
When searching for experts that specialize in furniture refinishing Chicago locals can pay a visit to our recommended homepage found here on www.vincesfurnitureservice.com. For further assistance, please make sure you contact us via this link http://www.vincesfurnitureservice.com.
No comments:
Post a Comment